Hebei Lantian Dedusting Equipment Co

What we all need to know about the high-temperature dust collector bag filter cloth is that it should not be hung too loosely or too tightly. If it is too loose, it will easily accumulate dust, and if it is too tight, it will easily break. Blow out the replaced filter bag with compressed air first, then check whether there are any holes. Repair any holes and leave them for replacement. If the filter bag is covered with dust, rinse it with water, dry it and leave it for replacement.
Electrostatic properties. The movement of gas or the collision of dust particles will cause some dust bag filter materials to be charged. This electrostatic charge affects the filtration process in two ways. The advantage is that opposite charges attract each other, causing the dust particles to move from the air flow to the dust bag with the opposite charge, which greatly improves the filtration efficiency. The disadvantage is that static electricity and its gravity do not necessarily disappear at the end of the filtration stage, making dust removal difficult. .
Thickness. Thickness is one of the important physical properties of dust bag, which has a great impact on the breathability and wear resistance of the filter material.
Dimensional stability. Dimensional stability refers to the expansion and contraction ratio of the filter material in the warp and weft directions. The expansion and contraction of the filter material changes the porosity of the filter material, which affects the filtration efficiency and resistance, and sometimes even affects the normal operation of the dust collector. Therefore, the smaller the expansion and contraction rate of the dust bag, the better.
The dust removal effect of dust collector bags is self-evident and is an indispensable part of dust collector equipment. The suitable bag material will be different for each model. Select the appropriate fabric based on temperature and humidity. In order to achieve better results, Hebei Hengrun specializes in the production of dust collector bags. When choosing a high-temperature dust collector filter bag, you should comprehensively compare the sorting of various filter materials. You should not use one so-called good filter bag to adapt to various working conditions. The performance of the filter bag should meet the normal conditions and special requirements of the production conditions and dust removal process. Clogged filter bag. When the filter bag is clogged, the resistance increases, which can be manifested by an increase in the reading value of the differential pressure gauge. Blockage of the filter bag is the main cause of wear, perforation and falling off of the filter bag. Reasons for filter bag clogging: (1) Temporarily strengthen dust cleaning to eliminate the clogging of the filter bag (2) Partially or completely replace the filter bag (3) Adjust installation and operating conditions.
Filter bag selection: Filter bags should be made of suitable filter materials that meet the working conditions. Reference should be made to temperature, moderateness, waterproofing, anti-static, and anti-oil pollution. Improper selection of filter materials will directly affect the dust removal efficiency.
Hebei Lantian Environmental Protection Equipment Co., Ltd. mainly produces high-temperature dust collector filter bags, Flumax, Metas, and film-coated filter materials. We will do better with our heart. We believe that quality is the driving force of success and cooperation, and it is also the main key that we attach most importance to. Do a good job in comprehensive work to achieve the final requirements for work implementation. We do every step with the most attentive attitude to achieve the highest quality, the best products, the most advanced technology, the most reasonable solutions, and the most up to standard results. The material, performance, material selection and use of cloth bags must be treated formally and scientifically.