Hebei Lantian Dedusting Equipment Co

The dust collector pulse controller has excellent dust removal efficiency
Once a problem occurs with the dust collector pulse controller, it will affect the operation of the entire equipment. It is the main control equipment of the dust collector. Excellent dust collector pulse control Instrument products can greatly improve dust removal efficiency and quality. The main ones commonly used in China are non-contact pneumatic mechanical pulse dust collector pulse controllers.
Many people don’t understand why the dust collector pulse controller can improve dust removal efficiency. When the dust collector pulse controller works, the main pulse generator generates pulses of a certain width. It is used to trigger a monostable trigger and a four-level cascaded bistable trigger at the same time. The bistable trigger flips in binary order when triggered by the main pulse. The output line of the four-level bistable trigger is After the diode matrix is decoded, ten lines are drawn out respectively. Each line and the output of the monostable trigger form an AND gate to drive the NOT gate amplifier to trigger the thyristor. The conduction of the thyristor is used to energize the solenoid valve. .
The closing time of the solenoid valve depends on the pulse width of the monostable trigger output. The pulse width is adjusted by changing the position of the potentiometer's sliding arm. The action interval between two adjacent NOT gates is realized by adjusting the position of the sliding arm of the potentiometer to change the pulse period.
The non-contact integrated pulse controller is designed with a digital setting circuit (that is, the output of the machine door can be set arbitrarily. The output of the machine door can be set arbitrarily). When in use, the required number of gates can be selected within the range of the entire output gate number range. The displays of both machines use common cathode digital tubes, which are beautiful and clear. The pulse injection controller is specially designed for pulse bag dust collectors. This series of products follows the rapid development of modern electronic science and adopts the most advanced digital integrated circuits. The programmable dust collector electric control cabinet is a kind of bag dust collector accessory. It is an electronic controller for pulse bag dust collector to carry out pulse injection dust cleaning. The dust collector electric control cabinet uses industrial-grade chips as the control core. The dust collector electric control cabinet has printed circuits. There are obvious setting marks on the board, making it easy to set up the controller.
Hebei Lantian Environmental Protection takes every step with the most attentive attitude to achieve the highest quality, the best products, the most advanced technology, the most reasonable plan, and the most up to standard results. We have always believed that we will do a good job in everything from business to technology to installation. As long as you need it, we will design a suitable plan for you, perform reasonable work, and meet product quality standards to ensure your satisfaction.